Tonner biyu na ƙarshen MX2626D
Hoton na'ura
Babban Bayanan Fasaha
| BAYANI DA MISALI | Saukewa: MX2626D |
| Gudun ciyarwa (m/min) | 6-30m/min |
| Max.Faɗin aiki (mm) | 800mm |
| Min.Faɗin aiki (mm) | 100mm |
| Max.Tsawon aiki (mm) | 2600mm |
| Min.Tsawon aiki (mm) | 300mm |
| Max.Kaurin aiki (mm) | 60mm ku |
| Min.Kaurin aiki (mm) | 10 mm |
| A tsaye kuma danna juyi juyi (r/min) | 6000/6000-8000r/min |
| A tsaye kuma danna diamita shaft (mm) | Φ40mm |
| Diamita mai yankan niƙa (mm) | Φ160-200mm |
| Danna diamita milling (mm) | Φ180mm |
| Ciyar da diamita na roba (mm) |
|
| Ƙarfin motsin igiya a tsaye (kw) | 3kwx6 ku |
| Ƙarfin wutar lantarki ta kati (kw) | 2.2kwx2 sets |
| Ciyar da wutar lantarki (kw) | 3 kw |
| Ƙarfin wutar lantarki (kw) | 0.75kw |
| Ƙarfin motsi (kw) | 0.75kw (motar bude nisa) |
| Jimlar ƙarfi (kw) | 26,9kw |
| Matsin iska (MPa) | 0.6MPa |
| Girman jiki (mm) | 3450x2600x1670mm |
Daki-daki
GABATARWA ELECTRONIC/PNEUMATIC/CONTROL CONFIGURATION
Mai sauya tsarin ciyarwa
Lambar mitar tana nuna cewa saurin isarwa shine mita 6-60 / minti, aiki mai dacewa, rage aiki, ceton kuzari, rage saurin lalacewa.
Abubuwan da aka shigo da su suna ɗaukar PLC da aka shigo da su da sarrafa juzu'i don tabbatar da na'urar ta tsaya
Daidaitaccen sandal
Ana hada kowane igiya kuma an gwada shi a cikin ɗaki mara ƙura.Matsayin SKF akan ƙarshen biyu kafin gamawa.cikakken santsi sandal yana tabbatar da saman ba tare da wani roughness ba
Yi amfani da damfara farantin karfe, benci mai ƙarfi mai ƙarfi don tabbatar da ingantattun mashin ɗin.
Waƙoƙi (mai jujjuyawar) tare da goge mai tsabta, layin dogo wanda aka ɗora shi da babban abu mai wuya, ya tsawaita injin.
Rayuwar sabis na na'urar.
An daidaita nisa tare da madaidaicin ball dunƙule
Mai sarrafa ƙofar Magnetic nuni daidaitaccen faɗaɗawa
Belin waƙa ya fi tsayi, ya dace da sarrafa faranti mai tsayi, kwanciyar hankali yana aiki sosai.
Fitowar motar aiki tare, mai ƙarfi da ƙarfi
